FAQ
Step1, please power on your On Lap monitor first by plugging USB Power cable.
Step2, please plug in the video cable to On Lap monito and Laptop. We suggest HDMO video input due to the population and high display quality. If your PC only supports VGA output, you may need an optional VGA cable in addition.
Any laptop, camera, or mobile phone can adopt On-Lap Monitor if your device supports HDMI / VGA image output. No matter your digital device operates what kind of OS, there is no driver required for On-Lap Monitor.
1002 cover: supports VESA 100 holes
1101: optioanl tripod mount kit supports VESA 75 holes and 1/4" screw hole.
1102:optional multi-mount kit supports VESA 75 holes
1303: optioanl VESA kit supports VESA 100 holes and 1/4"screw hole.
1502I:optional VESA kit supports VESA 100 holes
1503:optional multi-mount kit supports VESA 100 holes and 1/4" screw hole
1101 optioanl tripod mount kit supports VESA 75 holes and 1/4" screw hole.
1102 optioanl tripod mount kit supports 1/4" screw hole.
1303 optioanl VESA kit supports VESA 100 holes and 1/4"screw hole.
1503:optional multi-mount kit supports VESA 100 holes and 1/4" screw hole
On-Lap1305H supports one-second quick switch vertical display.
On-Lap1503H/A supports vertical display.
1002,1101,1303 needs Stand 4 for vertical display
Refer to the fig.; remove the 3 screws.Take off the Detachable Stand and put the magnetic buckle into the lower slot. Aligh Stand's mental latch to the slots on the side of monitor and put monitor into the stand finally.
We are sorry that there is no tool to install On-lap in the car.On-lap monitors are designed to use on the desk.It doesn't have the safety certification of car electronic equipment.Therefore,we won't suggest to use On-lap monitor in the car.
Stand 4 offers 4 different viewing angles and can be adopted to most On Lap Monitors. Please select the desied angle placement to assamble. Inser the X Plate onto the slot and position On Lap monitos on.
STEP1 Please remove the On-Lap 1302/1501 Monitor first
STEP2 Insert a ruler or rigid flat article into the gap at bottom of the Holder Plate; gently and evenly apply force back and forth to make the double-sided adhesive tape lose its viscosity. Do not use metal objects that can easily acratch the surface.