VESA 75 Quick Release Wall Mount Plate II-Accessories

VESA 75 Quick-Release Wall Mount Plate II (for M153U)

● Exclusive for M153U portable monitor
● Made of high-strength iron
● Compatible with VESA 75 M4 screw holes
● Can be secured directly onto the wall
● Can be attached to VESA 75 monitor arm/wall bracket/T1S5
Swivel Stand/T1S2 desktop stand, etc.
● Equipped with M1 quick-release plug for easy installation/removal
● Suitable for mounting M153U monitor in offices, home spaces, countertops, and production lines

Buy now

Specification

Installation

✪ "Click here" to download → Quick-Release Wall Mount Plate II instruction manual

● Safety Warning
1. When adjusting the tilt angle, hold two sides of the monitor evenly with both hands. Avoid single-handed operation to prevent screen cracking or deforming.
2. The company shall not be liable for compensation or consequential liability for damage to equipment or injury caused by improper use or installation(e.g., improperly tightened screws, etc.).

A. Mount on the Wall
Once you've determined your preferred display orientation, follow the steps in the figures below to install the plate, either horizontally or vertically.
① Align the plate's three screw holes with the desired mounting position and secure the plate to the wall by enforcing three M4 self-tapping screws.

② Align the quick release bottom port (for horizontal) or quick release right port (for vertical) on the back of the monitor with the quick release plug on the plate and insert the monitor.

B. Mount on T1S5 Swivel Stand or VESA 75 Monitor Arm
Once you've determined your preferred display orientation, follow the steps in the figures below to install the plate, either horizontally or vertically.
① Align the plate's two screw holes (for horizontal display) or (for vertical display) with the VESA 75 screw holes on the stand or monitor arm. Secure the plate to the stand or monitor arm by two sets of M4 bolt and nut.
② Align the quick release bottom port (for horizontal display) or quick release right port (for vertical display) on the back of the monitor with the quick release plug on the plate and insert the monitor.

C. Detach the Monitor
Caution! Do not install the plat with the quick release plug downward. Plugging the monitor in reverse is an incorrect way that may result in the monitor falling and the panel cracking.

2D Drawing

Elegant Ease

Wall-Mount Setup in One Second

Not only is it exclusive to monitors with VESA holes, the slim & portable monitor can also be mounted on walls! The quick-release wall mount plate II has been specifically designed for M153U portable monitor. This plate can be secured to the wall or VESA monitor arms and then plugged into M153U monitor with elegant ease, saving your installation time and effort and fitting perfectly into home and commercial spaces.

Slide 1

High Strength Robust & Durable

This wall mount plate II is made of sturdy iron and has three screw holes. By attaching the plate onto the wall with screws, it can securely carry M153U monitor on the wall. The compact design of the plate allows the monitor to be positioned a mere 3.5cm distance from the wall, eliminating the need for additional recesses in the wall, optimizing the overall configuration and create a natural display effect as if it were attached to the wall.

Iron with Powder Coating

Fine-textured matte black surface

Quick-Release Plug

Plug & Play, Easy Installation

Strong Hinge

Strong support and flexible tilt adjustment

Slide

*Caution: Avoid colliding the monitor with the wall while adjusting the tilt angles. The adjustable tilt angle varies depending on the model.

High-Strength Hinge

Free Adjustable Tilt Angle

The quick-release plug features a high-strength hinge design that allows the screen to be tilted forward and backward according to the mounting position and viewing needs.

Rotate View

Easy Switching to Portrait Mode

To achieve standard horizontal viewing, simply insert the quick-release plug of the plate into the bottom quick-release slot of M153U monitor. By inserting the right quick-release slot into the plate, the M153U portable monitor can be turned into a portrait display.

Slide

Slide

VESA 75 Standard Holes

Compatible for Various Mounts

When paired with a VESA 75 monitor arm, the quick-release wall mount plate can be easily elevated by using two sets of bolts and nuts to attach to the 75mm holes on either the top or bottom row of the VESA arm!

*When rotating the monitor orientation or adjusting the height on the monitor arm, please rotate or move the monitor by the VESA bracket of the arm. Do not directly hold and rotate the monitor.

Dual-Arm, Dual-Screen

A Perfect Match for Your Large Monitor

When using a large desktop monitor as your primary display, the M1 series of monitors can be converted to a vertical second monitor with a twin cantilever VESA　arm. Additionally, two M1 monitors can also be utilized to configure a dual-monitor workstation!

Slide

T1S5 Swivel Stand

360° Rotation

Securing Wall Mount Plate II to the VESA 75 holes of the T1S5 Swivel Stand (optional), which supports both horizontal and vertical display modes, creates a height and tilt angle adjustable desktop monitor. The 360-degree turntable at the base of the T1S5 stand allows you to intuitively adjust the monitor and share the screen with others with one finger!

Slide