T1S5 Swivel Stand-Accessories

T1S5 Swivel Stand

● Suitable for T1 & M1 Series Portable Monitors
● 360° Rotating Base for versatile positioning
● Stepless height and angle adjustment
● Compatible with standard VESA 75
● High-strength aluminum alloy
● Foldable design for easy portability
● Silicone anti-slip pads ensure stability for touchscreen use

※M1 Series monitors must be installed with Quick Release Wall Mount Plate (VESA 75) (optional)

※M153U must be installed with VESA 75 Quick-Release Wall Mount Plate II (optional)

Buy now

Specification

Product Name
T1S5 Swivel Stand

Applicable
T151A/Ｂ/E, T152C, T131A/B, T111A, T112C

M161H, M152H, M141E(Note! To apply to M1 series monitors, a installed Quick Release Wall Mount Plate (VESA 75) (optional) is required before mounting the monitor on the T1S5 Swivel Stand)

M153U(Note! To apply to M1 series monitors, a installed VESA 75 Quick-Release Wall Mount Plate II(optional) is required before mounting the monitor on the T1S5 Swivel Stand)

Dimension(W*H*D)
261.5x213x50mm

Weight
884g

Material
Aluminum alloy, Stainless steel, PC, Silicone

Color
Blue Grey

Accessories
Hex wrench and socket ×1 set ; M4 Screws (black) ×4 pcs ; Cable Strap ×2 pcs

Function
The T1S5 desktop swivel stand can be used with T1 series monitors. After attaching the monitor on the bracket with the VESA 75 Screw holes on the back of the T1 monitor, you can adjust the height and tilt angle of the monitor by using the stand's support arms. There is a 360-degree rotation function on the stand base, which allows you to steplessly rotate the monitor's orientation.

Adjustable height
1.2cm (min.) ~ 9.6cm (max.) (measured from bracket bottom edge)

Installation

✪ "Click here"to download → T1S5 instruction manual

● Safety Warning
1. Hold the bracket when adjusting the tilt angle of the monitor. Please DO NOT hold the monitor directly to prevent the monitor cracking or deformation.
2. Please place the stand on a flat table and avoid using it on a slanting desktop.
3. Please DO NOT tap the monitor or the stand vigorously. The stand may be overturned, and the monitor may be damaged.
4. GeChic shall not be liable for compensation or consequential liability for damage to equipment or injury caused by improper use or installation (e.g., improperly tightened screws, etc.).

● Stand Setup
As shown in the figure, place the stand on a flat and stable desktop before installing the monitor. Hold the base of the stand firmly with one hand, and grip the pull of the bracket with the other hand to erect it, allowing you to put the monitor on the bracket.

● Installation Instruction
【Set Up T1 Series Monitors】
① Spread a sponge pad or soft mat on the desktop and then gently put T1 monitor on pad with the panel side downward.
② For horizontal display, align the four bottom VESA 75 holes of the bracket with the screw holes on the monitor, and then secure the monitor onto the bracket with four M4 screws. For vertical display, with the I/O port upward, align the four top VESA 75 holes of the bracket with the screw holes on the back of the monitor, and then secure the monitor onto the bracket using four M4 screws.

③ Stand the monitor up on the desktop. It is suggested the user face the short side of the stand base to keep the stand stable when adjust the tilt angles.

● Height and Tilt Angles Adjustment
To change the angle of the stand, securely hold the base of the stand with one hand, and hold the bottom or the pull of the bracket to adjust the monitor to the desired height and tilt angle. DO NOT hold the monitor itself for adjustment.

A. Lay flat: hold the top and bottom of the bracket and lower the support arms, so that the screen can be used flat at 0°‧
B. Lowest Height: When the bottom of the bracket is close to the base, it is the lowest height.
Notice! If the bottom of the bracket is lower than the base, rotating the monitor may collide with the stand base, hindering rotation.
C. Regular Height: The monitor height and angle can be adjusted steplessly. After adjusting the monitor, it is crucial to make sure that the stand is stable and won't overturn during touch operations to ensure safe usage.
D. Highest Height: Erecting the support arms vertically provides the highest height.
Warning! When adjusting the monitor’s angle, please ensure its center of gravity remains within the turntable range to prevent tilting during use or touch operations.

● Connection and Cabling
Connect the cables to the monitor and use cable straps to secure them to the support arm.

● Rotate the Monitor
The monitor, mounted on the T1S5 stand, can be rotated 360°.

● Adjust the Tension of Support Arms
If the support arm joints are loose and unable to fix the angle or height, you can use the hex wrench and socket to adjust the tension at the support arm joints.
Caution! Do not overly loosen the support arm joints, as the monitor may gradually lower in height or tilt due to gravity, posing a risk of tipping.

------------------------------------------------------
● Installation Instruction
【Set Up M1 Series Monitors】
① Align two VESA 75 screw holes of Quick-Release Wall Mount Plate (VESA 75)(Optional) with the bottom holes on the bracket, and secure the plate to the bracket by two sets of M4 bolt and nut.
② Align the quick release bottom port (for horizontal) or quick release
left/ right port (for vertical) on the monitor with the quick release plug on the plate and insert the monitor. (Shown with M141E monitor in the figures)

Warning! DO NOT install the plate with the quick release plug downward. Plugging the monitor in reverse is an incorrect way that may result in the monitor falling and the panel cracking.

Warning! Please hold the bottom or pull of the bracket when adjusting the angles of the monitor. DO NOT hold the monitor directly, as this may cause it to crack or deform.

2D Drawing

Installation Height on M1-Series Monitors

T1S5 Aluminum Alloy Monitor Bracket

360°

,Beyond Flexibility and stability

The T1S5 swivel stand is designed to support both horizontal & vertical bi-orientation applications for T1 series touch monitors. The stand base is large enough to securely hold the monitor’s center of gravity, providing a stable touch operation. With its turntable and support arms, the monitor can rotate 360 degrees and adjust for height and tilt angle. The T1S5 stand can not only be used with a second monitor in a personal office, but it can also be used as factory/commercial equipment for easily building up flexible workstations, terminals, and countertop screens.

Slide 1

Support VESA 75

Horizontal & vertical Dual Applications

With VESA 75mm x 75mm holes, the T1S5 stand is suitable for both horizontal and vertical installation. It allows you not only to display the common landscape layout, but also portrait layout for vertically displaying menu, etc. For self-service kiosks, storefront digital signage, and exhibition halls/art galleries, the installed direction can be flexibly changed according to the content.

水平安裝

Horizontal

T15

T13

T11

360°Turntable

Steer in one Second for Instant Sharing

The turntable of T1S5 stand has just right torque. You can easily adjust the screen orientation 360 degrees by giving it a slight turn. There is a stop design inside the turntable, which prevent it sliding around after the angle is set. For personal use, you can share the screen with colleagues sitting next to you. At the service counter, the staff can also turn the monitor at any time to allow customers to view the screen contents, to touch and check or to handwrite their signatures, making the service process smoother.

Any Height/Angle As You Wish

Develop your own vision

The arms of the stand are designed with two pivoting sections. Use the bracket handle to pull the support arm to raise or lower the monitor and to change the tilt angle at will. As long as the monitor's center of gravity remains within the base, it can be adjusted in any way you like!

*Warning! When adjusting the monitor angle, keep the monitor's center of gravity within the range of the turntable to prevent the monitor from tilting over during use!
*Attention! If the bracket or the lower edge of the monitor is lower than the base, the monitor will collide with the base when rotating and cannot be rotated.

Slide

Made of Aluminum alloy

Stable, Durable but Not Heavy

The Stand is made of aluminum alloy, lightweight, high strength, and one-piece structured. The wide stand base, specially adopted to fit 15.6" touch monitor, allows 11-15" touch monitors to stand securely on the desktop.

A feast for Experience & Vision

Build a Personal Workstation

The T1S5 stand can also be adopted with M1 series monitors. Secure the quick release wall bracket (optional) to the T1S5 through the VESA 75 holes, and then plug the M1 monitor in. Both horizontal/vertical dual orientation installations are supported. You can change the screen height and tilt angle at demand as well.
When discussing with colleagues, simply use the turntable to rotate the monitor to share! When you need to move the monitor, just press the button on the quick release buckle and you can take it out in a second!

Quick Release Wall Mount Plate for M141E & M161H & M152H

Quick Release Wall Mount Plate II for M153U

Slide

Horizontal & Vertical Installation

M141E

✪ T1S5 Stand with M1 Monitor Height Reference→ M141E、M153U、M161H、M152H

The T1S5 Stand is ergonomically designed to flexibly adjust the display height and orientation according to your height and habits. The high-quality aluminum alloy also enhances the aesthetics of worktable and commercial spaces. Breaking the limitations of traditional desktop monitors, T1S5 stand makes T1 monitor more flexible for both personal and business use.

Slide

HOW TO VIDEO